Solvent effect on protein binding by polymer brush grafted onto porous membranes

An epoxy-group-containing polymer chain was grafted onto the hollow-fiber form of a porous polyethylene membrane by the immersion of the electron beam-irradiated trunk polymer in glycidyl methacrylate diluted with methanol and 1-butanol. The epoxy group density ranged from 8.5 to 13.4 mol per kg of the trunk polymer. Subsequently, the epoxy groups produced were converted into sulfonic acid and diethylamino groups. The density of -SOH and -N(C2H5), groups was 0.40 and 2.2 mol per kg of the product. respectively. The polymer brush, defined as a polymer chain extending from the surface of a pore toward the interior of the pore, was evaluated from the determination of an equilibrium binding capacity of hen egg lysozyme (HEL) and bovine serum albumin (BSA). The polymer brush prepared in 1-butanol was found to be longer than that prepared in methanol from the determinations of liquid permeability and protein adsorptivity. The proteins were bound to the polymer brush prepared in 1-butanol, followed by the functionalization, at higher degrees of multilayer binding: about 30 for HEL and 6 for BSA.     

Planar chiral cyclic ether: asymmetric resolution and chirality transformation

Remarkably stable planar chirality was found in a nine-membered diallylic cyclic ether. Enantiomerically enriched ether was prepared by a kinetic resolution of a racemic one, which is valuable as a novel type of chiral building block.     

Size distribution and characteristics of chemical components in ambient particulate matter.

Ambient particulate matter and gas in Kyoto were investigated by gravimetric analysis, X-ray fluorescence spectrometry, and ion chromatography in order to clarify their behavior and origin. The size distribution and characteristics of the chemical components in ambient particulates collected on PTFE membrane filters using an Andersen air sampler were examined from August 2001 to April 2004. A four-stage filter pack method was used to sample the atmosphere for the determination of gas (SO2, HNO3, HCl, NH3) and particulate matter (SO42, NO3, Cl-, Na+, K+, Ca2+, Mg2+, NH4+) concentrations from October 2002 to April 2004. The concentration of SPM mass was in the range of 6.7 - 80.2 microg/m3. The size distributions of SPM mass were bimodal, peaking at around 0.65 - 1.1 and 3.3 - 4.7 microm, and 40 - 85% of SPM mass was fine particles (< 2.1 microm). Na, Mg, Al, Si, Ca, Cl, and Fe were mainly present in coarse particles (2.1 to 11.0 microm), while S was present in fine particles. The concentrations of Al, Si, Ca, Mg, and Fe in fine particles increased from March to April in 2002, and those in coarse particulates increased in November 2002 and from March to April in 2004. This may be the effect of the continental yellow sand "Kosa." The differences in the size distributions of Al, Si, Ca, Mg, and Fe in particles may depend on differences in their place of occurrence and course of transport from China to Japan. The concentration of HCl gas was higher than that of particulate chloride ion in summer. Nitric acid gas existed at higher concentrations in summer, but fine particulate nitrate ion was observed in winter. The gaseous-to-fine aerosol nitrate fraction became higher at warmer temperatures. Coarse sulfate was below 10%, and SO2 gas and fine particulate sulfate were above 90%.     

Electrochemical synthesis of a polypyrrole thin film with supercritical carbon dioxide as a solvent

A conductive polypyrrole (PPy) film was successfully synthesized in a homogeneous supercritical carbon dioxide (scCO2)/acetonitrile (AN) system. The occurrence of a homogeneous supercritical state was confirmed by observations of the phase behavior of the system through a high-pressure cell with a viewing window. The concentration of a supporting electrolyte, tetrabutylammonium hexafluorophosphate (TBAPF6), significantly changed the phase behavior of the scCO2/AN system. The polymerization rate of the film in that system decreased with further addition of CO2. This result suggested that the low viscosity of scCO2 did not play an important role in improving the growth rate of the PPy film. The low polymerization rate might have been due to the electron-transfer resistance arising from the low dielectric constant of scCO2/AN mixture. The roughness of the film prepared in the homogeneous scCO2/AN system was 1/10 that synthesized in AN itself as a solvent. The slow growth of film and the high diffusion rate of the monomer seemed to account for the smooth flat film formation.     

A novel synthesis, including asymmetric synthesis, of 2,4,4-trisubstituted 2-cyclopentenones based on the reaction of 1-chlorovinyl p-tolyl sulfoxides with acetonitrile and its homologues

Reaction of 1-chlorovinyl p-tolyl sulfoxides, which were synthesized from chloromethyl p-tolyl sulfoxide and ketones in high overall yields, with cyanomethyllithium (lithium α-carbanion of acetonitrile) gave adducts in high to quantitative yields. The adducts were treated with LDA followed by lithium α-carbanion of the homologues of acetonitrile to give 3,5,5-trisubstituted enaminonitriles in good to high yields. Hydrolysis of the enaminonitriles under acidic conditions gave 2,4,4-trisubstituted 2-cyclopentenones in good yields. By using the optically active chloromethyl p-tolyl sulfoxide and unsymmetrical ketones, this procedure gave the optically pure 2,4,4-trisubstituted 2-cyclopentenones. The scope and limitations of this method and the mechanism of the reactions are also discussed. These procedures offer a new and effective method for the synthesis of 2,4,4-trisubstituted 2-cyclopentenones from four components, ketones, chloromethyl p-tolyl sulfoxide, acetonitrile, and its homologues.     

Theoretical study on spin alignments in ferromagnetic heterospin chains with competing exchange interactions: a generalized ferrimagnetic system containing organic biradicals in the singlet ground state

Spin alignments in heterospin chains are examined from numerical calculations of model spin Hamiltonians. The Hamiltonians of the heterospin chains mimic an open-shell molecular assemblage composed of an organic biradical in a singlet (S = 0) ground state and a doublet (S = 1/2) monoradical, which are coupled by intermolecular ferromagnetic exchange interactions. It is found from numerical calculations of the spin Hamiltonians that the spin value S2 of the ground-state singlet biradical embedded in the exchange-coupled assemblage deviates from zero and contributes to the bulk magnetization. The alternating chain is found to have two kinds of ground spin states, a high- and a low-spin state. All the spins are parallel to each other in the high-spin state, which is characterized by the spin correlation function of (S(i).S(j)) = 0.25. On the other hand, the spin alignment in the low-spin state is found to be dependent on the topology of the intermolecular exchange interactions. The energy preference of the two states depends on the relative amplitude of the exchange interactions in the chain. The intermolecular ferromagnetic couplings are competing in the ground-state singlet biradical with the intramolecular antiferromagnetic interaction. The appearance of the two kinds of ground states is attributed to a quantum spin frustration effect inherent in the triangular motif of the competing interactions. Magnetic properties of a zigzag chain complex composed of a nitronyl nitroxide biradical with a singlet ground state and Cu(hfac)2 are examined on the basis of the theoretical calculations. The vanishing magnetic moments, or the product of susceptibility and temperature chiT, at low temperatures observed for the complex are consistent with those of the low-spin state predicted in the theoretical calculations.     

Stereoselective synthesis of cis- and trans-2,3-disubstituted eight-membered medium-ring ethers based on Ireland-Claisen rearrangement of 3-alkoxy-2-propenyl glycolate esters and ring-closing olefin metathesis

A simple stereoselective synthesis of cis- and trans-2,3-disubstituted medium-sized cyclic ethers has been developed based on geometry-selective synthesis of 3-alkoxy-2-propenyl glycolate esters, Ireland-Claisen rearrangement of the glycolate esters, and ring-closing olefin metathesis.     

Duplex dissociation of telomere DNAs induced by molecular crowding

Because of the importance of telomere DNAs, the structures of these DNAs in vivo are currently of great research interest in the medical, pharmaceutical, chemical, and industrial fields. To understand the structure of biomolecules in vivo, their properties studied in vitro are extrapolated to the in vivo condition, while the condition in a living cell is inherently molecularly crowded and a nonideal solution contains various biomolecules. We investigated the effect of molecular crowding, which is one of the most important cellular environmental conditions, on the structure and stability of the telomere and G-rich and C-rich DNAs using circular dichroism (CD) spectra, CD melting curves, and isothermal titration calorimetry (ITC). The CD spectra and CD melting curves of G-rich DNA, C-rich DNA, and the 1:1 mixture of G-rich and C-rich DNAs showed that each G-rich DNA, C-rich DNA, and the 1:1 mixture form the antiparallel G-quadruplex, I-motif, and duplex, respectively, in the noncrowding condition as previously considered. On the contrary, the G-rich and C-rich DNAs individually form the parallel G-quadruplex and I-motif, respectively, in the molecular crowding condition, and the 1:1 mixture folds into the parallel G-quadruplex and I-motif but does not form a duplex. The ITC measurements indicated that the thermodynamic stability (DeltaG degrees (20)) of the duplex formation between the G-rich and C-rich DNAs in the noncrowding condition was -10.2 kcal mol(-)(1), while only a small heat change was observed in the ITC measurements in the molecular crowding condition. These ITC results also demonstrated that the molecular crowding condition prevents any duplex formation between G-rich and C-rich DNAs. These results indicate that a structural polymorphism of the telomere DNAs is induced by molecular crowding in vivo.     

Imaging of enzyme activity by scanning electrochemical microscope equipped with a feedback control for substrate-probe distance

The enzymatic activity of diaphorase (Dp) immobilized on a solid substrate was characterized using a scanning electrochemical microscope (SECM) with shear force feedback to control the substrate-probe distance. The shear force between the substrate and the probe was monitored with a tuning fork-type quartz crystal and used as the feedback control to set the microelectrode probe close to the substrate surface. The sensitivity and the contrast of the SECM image were improved in the constant distance mode (distance, 50 nm) with the shear force feedback compared to the image in the constant height mode without the feedback. By using this system, the SECM and topographic images of the immobilized diaphorase were simultaneously measured. The microelectrode tip used in this study was ground aslant like a syringe needle in order to obtain the shaper topographic images. This shape was also effective for avoiding the interference during the diffusion of the enzyme substrates.